Basic Management Tasks
40
Instruction Manual - NXA-ENET8-POE+
Hardware/Software Versions
Use the System > Switch page to display hardware/firmware version numbers for the main board and management software, as
well as the power status of the system.
The following table lists the options on this page. The options on this page on view-only.
To view the hardware and software version information, click
System
, then
Switch
.
System Capabilities
Use the System > Capability page to configure jumbo frames or bridge extension settings.
System - Switch Options
Main Board Information
Serial Number
Displays the serial number of the switch.
Number of Ports
Displays the number of built-in ports.
Hardware Version
Displays the hardware version of the main board.
Main Power Status
Displays the status of the internal power supply.
Management Software Information
Role
Displays whether the switch is operating as Master or Slave.
Loader Version
Displays the version number of the loader code.
Operation Code Version
Displays the version number of the runtime code.
FIG. 24
General Switch Information
System - Capability Options
General Capability
Jumbo Frame
Configures support for jumbo frames. The default setting is disabled.
Bridge Extension
Extended Multicast Filtering Services This switch does not support the filtering of individual multicast addresses based on GMRP (GARP
Multicast Registration Protocol).
Traffic Classes
This switch provides mapping of user priorities to multiple traffic classes. (Refer to "Class of
Service" on page 193.)
Static Entry Individual Port
This switch allows static filtering for unicast and multicast addresses. (Refer to "Setting Static
Addresses" on page 157.)
VLAN Version Number
Based on IEEE 802.1Q, "1" indicates Bridges that support only single spanning tree (SST)
operation, and "2" indicates Bridges that support multiple spanning tree (MST) operation.
VLAN Learning
This switch uses Independent VLAN Learning (IVL), where each port maintains its own filtering
database.
Local VLAN Capable
This switch does not support multiple local bridges outside of the scope of 802.1Q defined VLANs.
Configurable PVID Tagging
This switch allows you to override the default Port VLAN ID (PVID used in frame tags) and egress
status (VLAN-Tagged or Untagged) on each port. (Refer to "VLAN Configuration" on page 139.)
Max Supported VLAN Numbers
The maximum number of VLANs supported on this switch.
Max Supported VLAN ID
The maximum configurable VLAN identifier supported on this switch.