Multicast Filtering
237
Instruction Manual - NXA-ENET8-POE+
Perform these steps to specify a static interface attached to a multicast router:
1.
Click
Multicast
>
IGMP Snooping
>
Multicast Router
.
2.
Select
Add Static Multicast Router
from the Action list.
3.
Select the VLAN which will forward all the corresponding multicast traffic, and select the port or trunk attached to the
multicast router.
4.
Click
Apply
.
Perform these steps to show the static interfaces attached to a multicast router:
1.
Click
Multicast
>
IGMP Snooping
>
Multicast Router
.
2.
Select
Show Static Multicast Router
from the Action list.
3.
Select the VLAN for which to display this information.
Port or Trunk
Specifies the interface attached to a multicast router.
Show Static Multicast Router
VLAN
Selects the VLAN for which to display any configured static multicast routers.
Interface
Shows the interface to which the specified static multicast routers are attached.
Show Current Multicast Router
VLAN
Selects the VLAN for which to display any currently active multicast routers.
Interface
Shows the interface to which an active multicast router is attached.
Type
Shows if this entry is static or dynamic.
Expire
Time until this dynamic entry expires.
FIG. 277
Configuring a Static Interface for a Multicast Router
FIG. 278
Showing Static Interfaces Attached to a Multicast Router
Multicast - IGMP Snooping (Multicast Router) Options