Disk Installation Guide
Important instruction on how to install hard disks in your ReadyNAS
READYNAS
X6
version B
the components
side
the connector end
☼
☼
Prepare for Installation
2
Install the hard disk mounting brackets
1
Remove the top cover to access disk cage
ReadyNAS X6 case (Version B)
Remove the 3 screws in back.
Remove top cover
Disk installation Accessories
Install the bracket
to the new hard disk
Prepare SATA hard disk drives
Please read this guide before you install disks into your ReadyNAS system. Prepare the
following for the disk installation:
ReadyNAS X6 Disk-less System
Disk drive brackets and screw in accessory box
Hard disk drives (not included)
Screw driver (not included)
ReadyNAS X6 allows you to start with one disk and add a second disk at a later time for
redundancy. You can then expand the data volume by adding a third disk to double the
capacity or a fourth disk to triple the capacity. This guide illustrates the steps of install-
ing four disks.
the Components Side
F
4 x
16 x
F
