Control Panel Operation
72
Epica DGX 32 Instruction Manual
2.
Locate Setup Options by scrolling with the Control Dial.
3.
Press the Select Key.
The Setup Options submenu appears.
Locate Software Version by scrolling with the Control Dial.
4.
Press the Select Key again to choose Software Version.
The Software Version Screen appears.
5.
Scroll with the Control Dial to see additional Software Version information.
6.
Press the Cancel Key to return to the Setup Options submenu.
Or
press the Function Key to return to the Function menu.
Default Virtual Matrix
The factory default virtual matrix for the Epica DGX 32 is VM 0. You have the option of changing the
factory default virtual matrix for your system. When you choose a new default virtual matrix, the system
will revert to that virtual matrix each time the system is powered up even if you changed the virtual
matrix using the V.Matrix list during normal operation. The power
must
be cycled before the default
virtual matrix changes are implemented. If you want to immediately switch on the default matrix, either
change the current virtual matrix (see page 60) or cycle the power.
The following example changes the default virtual matrix
from VM 0 to VM 2, a custom virtual matrix.
To change the default virtual matrix:
1.
Press the Function Key.
The Function menu appears.
2.
Locate Setup Options by scrolling with the Control Dial.
3.
Press the Select Key.
The Setup Options submenu appears.
Version number
Summary of Contents for Epica DGX 32
