![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448117.webp)
Appendix B – Managing Configuration Files
111
Epica DGX 32 Instruction Manual
AMX AutoPatch CD Information
If you cannot locate the
AMX AutoPatch CD
that shipped with your system and your AMX account has
the required permissions, you can download the newest version of XNConnect from
www.amx.com
.
An INI file Updater for updating XNConnect is available on the AMX website under Tech Center \
AutoPatch Tools; an account is not required. If you need an .xcl configuration file that is compatible with
your system, either discover the system (see page 112) or contact technical support (see page 40) and
provide your system’s serial number.
Installing and Launching XNConnect
Use this software
only
if you need to customize or change the configuration information from the
original specification.
Important: Even if XNConnect is already on your PC, install the newest version that shipped on the
AMX AutoPatch CD with your system. We strongly recommend uninstalling the old version of
XNConnect before installing a new version.
System Requirements
Windows XP Professional
®
233 MHz processor
Minimum of 128 MB of RAM
20 MB of available hard drive space
800x600 screen resolution (1024x768 is recommended)
Serial port and RS-232 null modem cable
To install XNConnect from the AMX AutoPatch CD:
1.
Close all other applications currently running on your PC.
2.
Insert the
AMX AutoPatch CD
into your CD drive to start automatically.
If the CD does not autorun, explore the CD folder and double-click the Index.html file.
3.
Select Software and find XNConnect.
4.
Optional – Select the Release Notes to read about the software before installation.
5.
Select Install.
6.
Follow the directions in the subsequent dialog boxes.
Note: If your account has the required permissions, the newest version of XNConnect can be
downloaded from www.amx.com. An AutoPatch INI Updater file can also be found on the AMX
website under Tech Center \ AutoPatch Tools for updating XNConnect with information for new
support devices and input and output boards (an account is not required).
Summary of Contents for Epica DGX 32
