![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448023.webp)
Installation and Setup
17
Epica DGX 32 Instruction Manual
Circuit Overloading
When connecting the equipment to the supply circuits, be aware of the effect that overloading the
circuits might have on over-current protection and supply wiring.
Reliable Earthing (Grounding)
Reliable earthing of rack-mounted equipment should be maintained. If not using a direct connection to
the branch circuit (e.g., plugging into a power strip), pay particular attention to supply connections.
Caution: We strongly recommend attaching all of the power cords to a surge protector and/or an AC
line conditioner. After powering up the enclosure, apply power to the source and destination devices.
Unpacking
The Epica DGX 32 is shipped with one enclosure per shipping box. The invoice is sent separately;
a packing slip is attached to the outside of each box. Each box contains the following items:
Epica DGX 32 enclosure
Two standard US power cords (if shipped within the US)
Other enclosure products, as needed
The documentation in the first box includes:
AMX AutoPatch Epica DGX 32 Quick Start Guide
Control Panel Custom Label Kit (for inputs and outputs and for LCD Function menu)
AMX AutoPatch CD
For orders comprising multiple enclosures, the shipping boxes are marked as “Chassis __ of __,” where
the first blank is the box number and the second blank is the total number of boxes in the shipment.
Important: If applicable, the shipping boxes each have a bright yellow/green sticker that states that
the unit (enclosure) is part of a multiple-enclosure system and must be installed with the same serial
numbers.
Unpacking Tips
Before fully unpacking the enclosure,
inspect the shipping box for any signs of damage
.
If a box is partially crushed or any sides have been broken open, notify the shipping agency
immediately and contact your AMX representative (see the warranty on the
AMX AutoPatch CD
or at
www.amx.com
).
Once unpacking is complete, closely check the physical condition of the enclosure.
Collect all documentation.
Note: Please save the original shipping container and packing materials. AMX is not responsible for
damage caused by insufficient packing during return shipment to the factory. Shipping boxes are
available; contact your AMX representative for details.
Summary of Contents for Epica DGX 32
