![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448037.webp)
Installation and Setup
31
Epica DGX 32 Instruction Manual
The Found New Hardware Wizard opens with the default selected to automatically install the
software. (The dialog boxes may differ slightly from those shown, depending on the operating
system for the PC.)
4.
Insert the
AMX AutoPatch CD
into the PC’s CD holder.
5.
Click Next.
6.
Click Finish when prompted to close the wizard.
Identifying the Virtual Com Port
You
must
identify the virtual Com port assigned to the USB connector to enable communication between
the control PC and the Epica DGX 32.
The enclosure
must
be connected to the PC via the USB port and powered up before you start the
following procedure, so the PC can display the port number.
To identify the virtual Com port:
1.
Open the Windows Device Manager (Start/Settings/Control Panel/System/System Properties/
Hardware tab/Device Manager button) and expand Ports by clicking on the “+”.
(The Device Manager may have a different location depending on the operating system and theme
selected.)
Summary of Contents for Epica DGX 32
