![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448075.webp)
Control Panel Operation
69
Epica DGX 32 Instruction Manual
Typical uses for input gain adjustment include switching consumer and professional grade audio
equipment (whose levels can vary noticeably) in the same matrix switcher. Input gain adjustment is also
used for equalizing amplitudes between balanced and unbalanced source inputs.
To adjust input gain (including adjusting input gain to equalize input levels):
1.
If adjusting input gain to equalize input levels – Route a source (input) to the desired destination
(output).
2.
Press the Function Key.
The Function menu appears.
3.
Locate Adjust Audio by scrolling with the Control Dial.
4.
Press the Select Key to enter the selection.
The Adjust Audio submenu appears.
5.
Scroll to Input Gain.
6.
Press the Select Key.
The system is in Input Gain Mode (the available Input Keys turn blue; all Output Keys are turned
off).
7.
Press the Input Key that corresponds to the input to be adjusted.
The Adjust Input Gain Screen appears, displaying the gain range of the audio board and the current
gain setting.
8.
Adjust the input gain by turning the Control Dial.
The gain audibly adjusts as you turn the Control Dial.
9.
If adjusting input gain to equalize input levels – Repeat Steps 7 and 8 for
all
sources that will be
routed to the same destination.
Or
If adjusting input gain for a single input – Repeat Steps 7 and 8 for the desired input.
10.
Press the Cancel Key to return to the Adjust Audio submenu.
Or
Press the Function Key to return to the Function menu.
Current gain setting
Gain range
Summary of Contents for Epica DGX 32
