![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448035.webp)
Installation and Setup
29
Epica DGX 32 Instruction Manual
4.
Setup and run the desired method of control:
AMX Controller – For control programming information, see the instruction manual for the
specific interface
APControl 3.0 – Install and open the program (located on the
AMX AutoPatch CD
). Follow
the setup wizard. Manually create the VM (virtual matrix) and specify the number of inputs
and outputs. Open the APControl Launchbar. From the Launchbar menu, select Views /
CrossBar and click the crosspoints to execute switches.and click the crosspoints.
Terminal emulation (e.g., HyperTerminal) – Open the program,
select the Com port, and set the settings to match the default
ones in the Epica DGX 32 Serial Port Settings table to the right.
Click OK. A short splash screen appears.
5.
Execute a test switch to ensure the Epica DGX 32 is working
properly (see page 38).
Serial Communication Settings
When controlling the system with a serial controller, use serial
communication software and make sure the baud rate is set correctly for the system. The recommended
settings (default settings) for serial communication with an Epica DGX 32 Distribution Matrix are
provided in the table above.
Epica DGX 32
enclosures support baud rates of 9600 (default), 19200, 38400, and 57600. The settings
on the PC serial communication software and the enclosure
must
correspond to each other. If a change is
required to make them match, changing the PC’s settings is preferable. If you decide to change the
enclosure’s settings instead, use XNConnect (see the Help file).
RS-232 Pin Diagram
Use a null modem cable that matches the pin diagram in FIG. 15 for RS-232 without hardware flow
control. AMX AutoPatch equipment requires pins 2, 3, and 5 only.
FIG. 15
RS-232 null modem cable pin diagram, no hardware flow control
PC: DB-9
AMX AutoPatch: DB-9
Epica DGX 32
Serial Port Settings
Baud Rate
9600
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
RS-232 pin diagram
Summary of Contents for Epica DGX 32
