![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448063.webp)
Control Panel Operation
57
Epica DGX 32 Instruction Manual
Menus and Modes
The Function menu and its submenus access the modes and functions
used to control the system. The modes are Change, Virtual Matrix, Status,
Disconnect, Setup Options, Lock Panel, Global Preset, and Local Preset.
While in a mode, the same command can be repeated, without having to
return to the Function menu to reselect the mode, e.g., executing more
than one local preset.
Use the Control Dial and Select Key to navigate the Function menu, and
submenus. The Function menu and the submenus are loop menus, which
means that each menu returns to its first item after you scroll past its last
item.
Note: A clear label with white lettering that shows the entire LCD
Function menu (as shown to the right) is included in the Control Panel
Label Kit shipped with the system. Dust surface of control panel near
the LCD with a dry cloth (if necessary, use a non-abrasive cleaner),
peel the backing off of the label, and firmly press the label on panel.
The Function menu (see right) and its submenus access the following modes and functions:
Change
Selecting Change places the system in Change Mode. The Control Panel
must
be in Change Mode to
execute switches. While in Change Mode, select the Input and Output(s) Keys followed by the Take Key
to execute switches (see page 59).
Virtual Matrix
Selecting the Virtual Matrix Mode accesses the virtual matrices designated for the system in the
configuration file (VM 0, VM 1, and
any custom virtual matrices). The Virtual Matrix Mode can be
selected to change the virtual matrix currently used to execute operations (see page 60).
Status
Selecting Status places the system in Status Mode. Status Mode is used to confirm signal routing or
routing to multiple outputs without risk of accidentally executing a switch (see page 62).
Disconnect
Selecting Disconnect places the system in Disconnect Mode. While in Disconnect Mode, select the Input
or Output Key(s) followed by the Take Key to disconnect switches (see page 61). While in Disconnect
Mode, the Control Panel does not indicate the current routing of selected inputs or outputs.
Setup Options
Selecting Setup Options (see page 71) accesses the Setup Options submenu to check the software
version, change the default virtual matrix, reload the configuration file (when directed to do so by
technical support), and change the control panel password.
Lock Panel
Selecting Lock Panel places the Control Panel in Lock Mode at which time the password is entered to
lock the panel. Locking the panel limits access which can prevent accidental switches (see page 70).
Adjust Audio
This menu item will not display unless the Epica DGX 32 is linked to an enclosure that supports audio
functions. Selecting Adjust Audio accesses the Adjust Audio submenu. From this menu, you can place
the panel in Output Volume Mode, Mute/Unmute Mode, or Input Gain Mode (see page 66).
Global Preset
Selecting Global Preset accesses the Global Preset submenu to execute global presets or define global
presets (see page 63).
Function menu structure
Summary of Contents for Epica DGX 32
