![background image](http://html1.mh-extra.com/html/amx/epica-dgx-32/epica-dgx-32_instruction-manual_2938448048.webp)
Installation and Setup
42
Epica DGX 32 Instruction Manual
To connect the Epica DGX 32 to a PC network card:
1.
Complete the installation of the Epica DGX 32 system (see page 19) including power up of the
system.
2.
Insert one end of the RJ-45 cable into a network (NIC) card on a PC.
3.
Insert the other end of the RJ-45 cable into the TCP/IP port on the enclosure.
4.
Check the indicator LEDs for the TCP/IP connector (see page 41).
5.
Follow the instructions for accessing Zero-Config information in the NetLinx Studio WebConsole
(see below). Make note of the IP address for the Epica DGX 32 (you will need the IP address for the
test procedure below).
6.
Complete the installation by testing the connection (see the instructions on the next page).
Accessing Zero-Config Information in the NetLinx WebConsole
NetLinx Studio version 3.0 (or higher) features a “Zero-Config” tab in the Workspace Window. This tab
provides Zero-Config networking functionality within NetLinx Studio.
Refer to the NetLinx Studio online help for details on using Zero-Config.
The following assumes that the Epica DGX 32 resides on the same LAN as the PC running NetLinx
Studio and the NetLinx Master to which the Epica DGX 32 is connected.
To determine the IP address for the Epica DGX 32, you can access the unit via the Zero-Config feature in
NetLinx Studio.
To access the Epica DGX 32 via Zero-Config:
1.
In NetLinx Studio (v3.0 or higher), right-click the Zero-Config tab of the Workspace Bar to access
the Zero-Config shortcut menu.
2.
Select Refresh Zero-Config List to generate an initial listing of all Zero-Config devices that have
been detected.
3.
Click the plus symbol (+) to expand any device in the Zero-config list.
4.
The Epica DGX 32 Matrix Switcher’s current IP Address is listed below the device name.
FIG. 24
RJ-45 cable connected to TCP/IP port
TCP/IP (RJ-45) connector
Cable to NIC card on a PC
NXB-AP-1000 Server LED
Summary of Contents for Epica DGX 32
