608FX4
4+4F 100M Managed
Ethernet Switch
608FX4 is 4-port 10/100Base-TX RJ-45 and 4-port 100Base-FX
managed Ethernet switch with reverse polarity protection of DC
input. It has ingenious appearance design and supports DIN Rail-
mounted/wall-mounted to facilitate in various industrial network
applications.
・
Overview
Quick Installation Guide
・
Safety Precautions
AVCOMM Technologies, Inc
・
Appearance
1.DIN-Rail clip
2.Mounting bracket
3.Grounding screw
4.Power & relay alarm input
terminal
5.Reset
6.Console port
7.Relay alarm indicator
8.Power indicator P1 P2
9.Run indicator
10.100Base-X port indicator
11.100Base-X port
12.Company logo
13.10/100Base-TX port indicator
14.10/100Base-TX port
•
1 x Product Unit
•
2 x mounting plate
•
6 x screw
•
1 x Quick Installation Guide
・
Package Checklist
DIN Rail-mounted
To mount the switch on the DIN Rail track,
insert the upper end of the DIN
‐
Rail clip into
the back of the DIN
‐
Rail track from its upper
side and lightly push the bottom of the
DIN
‐
Rail clip into the track. The DIN Rail
should comply with DIN EN50022 standard.
Using wrong DIN rail may cause unsafe
installation.
・
Indicator
Grounding Screw
For avoiding system damage by noise or electric shock,
establish a direct connection between the grounding screw and
the grounding surface prior to connecting devices.
Wiring the Power Input
1) Insert the positive and negative wires into the V+ and V-
contact on the terminal block connector.
2) Tighten screws when the wire is connected.
3) Connect the power wires to suitable DC Switching type power
supply.
Keep DC power off before connecting to the terminal block
connectors and ensure all connections are secure established.
Do make sure that models connect to the corresponding supply
voltage. The device is to be supplied by Limited Power Supply.
The relay contact supports 0.5 A current, DC 24V
Do not touch the surface of the switch while it is in
operation!
www.avcomm.cn
www.avcomm.cn
Wall-mounted
Tighten the metal fixation plate
by , then hang the machine
with locked metal strip onto
wall or machine cabinet.
LED
Status
Description
P1 P2
Green On
Power is in normal condition
Green Off
Power is abnormal or power failure
FAIL
Red On
With alarm output
Red Off
Without alarm output
RUN
Green Blinking
Normal running
Green On/Off
Abnormal running
Fiber port
Green On
Network is ready
Green Blinking
Network is established
Green Off
Link is not ready or link failure
RJ45
Green On
Amber On
100Base network is ready
Green On
Amber Blinking
100Base network is established
Amber On
Green Off
10/100Base network is ready or link
failure
Amber Blinking
10/100Base network is established
Amber Off
Link is not ready or link failure
・
Installation
