5-8
Operator’s Manual
2.
Press the
Info
button on the keypad.
The LCD displays the Flash part number and version.
CAM 30
F 0701-2489-0100
Notice the “F” prefix in front of the ID code; this indicates that it applies
to the dome's Flash PROM.
3.
Press the
Info
button again to display the dome's EEPROM part number
and version.
CAM 30
E 0701-2488-0100
Notice the “E” prefix in front of the ID code; this indicates that it applies
to the dome's EEPROM.
4.
Each time you press the
Info
button, you alternate between the Flash
PROM and the EEPROM ID codes.
5.
When you finish displaying the dome information, press the
Clear
button. The T
OUCH
T
RACKER
resumes camera control mode.
Special Utilities
Although
Adjust V-phase
,
Show Sys Info
,
Port Settings
and
Ping
Dome/TTR
are considered utility items on the menu, these utilities are
reserved for use by authorized service personnel. However, they may be
performed by you, with the assistance of an authorized service provider over
the phone. There are no procedures in this manual describing their use.
