3-18
Operator's Manual
33
on the LCD). When the appropriate value appears in the
Cam
field,
continue with step 5.
5.
The input number appears after the slash (
/
) on the top line. Move the
Tracker Ball up or down to display the input numbers for the selected
camera. Continue with step 6 when the appropriate input number
appears.
6.
The flashing cursor appears in the
Mon
field. Press the number button
(1-5) for the monitor where you want the alarm video to appear.
7.
Move the Tracker Ball to the right. In the bottom line
Cam
field, enter the
camera number (01-32) whose Quick View, Pattern, or fixed shot
appears when this alarm is triggered. This is the same camera whose
output starts when the alarm is triggered. Use the number buttons on the
keypad to enter the camera number.
The camera number must be entered
as two digits.
8.
Choose one of the following:
•
Do you want a Quick View to appear when this alarm is
triggered?
If so, use the number buttons to indicate the specific
Quick View (01-96). Use two digits when entering numbers.
•
Do you want a Pattern to appear when this alarm is triggered?
If so, press the
Pattern
button, and then use the number buttons
to indicate the specific Pattern (1-3).
•
Do you want a fixed shot to appear when this alarm is
triggered?
If so, press the
View
button, but do not enter any
number in this field. When this alarm is triggered, you will see
video of wherever the camera (that you indicated in Step 7) is
currently pointing.
9.
Move the Tracker Ball to the right of the
View/Patn
field. The output
information appears on the LCD. In the
Outp
field, indicate the specific
output that will be initiated when this alarm is triggered. Use the number
buttons (1-4) to enter the number. Remember, this output must be
connected to the camera you picked in Step 6.
