1-6
Operator’s Manual
The
Tracker Ball
provides variable speed control of a camera's pan and tilt.
When the menu is displayed, the Tracker Ball enables you to scroll through
the menu items on the LCD.
The
zoom
and
focus buttons
enable you to control a camera's zoom and focus.
The
Zoom In
and
Zoom Out
buttons are located to the left of the Tracker Ball.
The
Focus Near
and
Focus Far
buttons are located to the right of the Tracker
Ball. When the menu is displayed, the zoom and focus buttons allow you to
select the items on the LCD.
The
keypad
contains buttons that call up video from individual cameras and
control the pre-programmed movement of those cameras. It also contains the
buttons for camera iris control, output control, and monitor selection.
The
LCD,
located at the top of the keypad, displays the currently selected
camera and monitor numbers, as well as system prompts and messages. It
enables you to see the numbers you enter from the keypad as you enter them.
It also displays the menu.
Modes of Operation
The T
OUCH
T
RACKER
has four different modes of operation:
•
Camera Control Mode
•
Menu/Programming Mode
•
Sequence Mode
•
Alarm Mode
The system functions differently depending on its mode of operation. A
description of each of these modes appears in this section.
Camera Control Mode
When the T
OUCH
T
RACKER
is in the camera control mode, you can:
•
Select which monitor you want to display camera video. Refer to
“Selecting Monitors,” in Chapter 2.
