5-4
Operator’s Manual
I M P O R T A N T
If you have two T
OUCH
T
RACKER
s installed at your facility, one must be
designated primary and one must be designated secondary. You can
determine which T
OUCH
T
RACKER
has been designated as “secondary” by the
letter
S
that appears in the lower right corner of the LCD.
If you have only one T
OUCH
T
RACKER
installed at your facility, it must be
designated primary.
1.
On the first T
OUCH
T
RACKER
, press the
Menu
button to display the menu.
2.
Scroll through the menu items and press the appropriate button—zoom or
focus—to select
Tog Primary/2nd
.
The LCD displays the following prompt:
* PRIMARY UNIT
SECONDARY UNIT
The asterisk (*) identifies the current setting for the T
OUCH
T
RACKER
.
3.
Press the
Next
or
Previous
(or
A
or
B
) button to change the setting.
PRIMARY UNIT
* SECONDARY UNIT
4.
When the correct setting is selected, press the
Menu
button to exit the
menu/programming mode on the first T
OUCH
T
RACKER
.
5.
Repeat steps 1 through 4 on the second T
OUCH
T
RACKER
if a switch in
functionality is required. Be sure that the two T
OUCH
T
RACKER
s
do not
have the same setting.
The T
OUCH
T
RACKER
restarts in camera control mode.
