About Your New System
1-7
•
Select which camera's video you want to display on the selected monitor.
Refer to “Controlling Cameras,” in Chapter 2.
•
Control the pan, tilt, zoom, focus and iris of the selected camera. Refer to
“Controlling Cameras,” in Chapter 2.
•
Run Quick Views, Patterns, and Sequences. Refer to “Displaying Quick
Views,” “Running Patterns,” and “Running Sequences” in Chapter 2.
•
Control output devices attached to domes or the video matrix switcher.
Refer to “Controlling Output Devices,” in Chapter 2.
In the camera control mode, the currently selected monitor and camera
numbers appear on the LCD. In addition, status messages that occur stay on
the LCD for 5 seconds. If two T
OUCH
T
RACKER
s are installed, the letter
“S”
appears in the lower right corner of the LCD belonging to the secondary
T
OUCH
T
RACKER
.
In this mode the Tracker Ball functions as the camera pan/tilt controller, and
the zoom and focus buttons control the zoom and focus of the currently
selected camera.
Menu/Programming Mode
You activate the menu/programming mode by pressing the
Menu
button on
the T
OUCH
T
RACKER
. When the T
OUCH
T
RACKER
is in the menu/
programming mode, the LCD displays the available menu selections. The
Tracker Ball functions as a cursor controller by enabling you to scroll
through the menu selections.
The zoom and focus buttons enable you to select an item on the menu. There
are always two menu items visible at one time on the LCD. Use a zoom
button (to the left of the Tracker Ball) to select the item on the top line. Use a
focus button (to the right of the Tracker Ball) to select the item on the bottom
line.
