2-12
Operator's Manual
If you entered an invalid output number (any number greater than 4 or an
output that does not exist) the T
OUCH
T
RACKER
beeps.
Controlling Switcher Outputs
If you press the
Output On
button without entering a number first, the
output device connected to the video matrix switcher activates. The following
information will appear on the LCD:
CAM 25 OUTPUT
MON 3 ON
If you press the
Output Off
button without entering a number first, the
output device connected to the video matrix switcher deactivates. The
following information will appear on the LCD:
CAM 25 OUTPUT
MON 3 OFF
Clearing System Alarms
Note
Alarms can be cleared from the primary T
OUCH
T
RACKER
only.
Your system can be configured to handle up to 136 different alarms (128
from dome inputs, 8 from video matrix switcher inputs). When an alarm is
triggered, it takes precedence over whatever you are doing on the primary
T
OUCH
T
RACKER
. For example, if you are in the programming mode when
an alarm comes in, the alarm information replaces the programming
information on the LCD. If you are running the Sequence when an alarm
comes in, the alarm information replaces the Sequence information on the
LCD. In addition, the video from the alarm appears on the monitor
designated by the alarm.
