2-2
Operator's Manual
Selecting Monitors
Your system supports up to five monitors for displaying camera video. If two
T
OUCH
T
RACKERS
are installed at your facility, either controller may display
video from any camera on any of the monitors. However, only one T
OUCH
T
RACKER
can be in control of a monitor at any given time.
To select a monitor, do the following:
1.
Use the number buttons to enter a monitor number (1 - 5).
2.
Press
(the
Monitor
button).
Note:
The T
OUCH
T
RACKER
beeps if you enter an invalid monitor number
(any number greater than 5).
Controlling Cameras
Your system supports up to 32 cameras. Each camera has a unique number
associated with it. To select a camera, use the number buttons to enter the
camera number, and then press
(the
Camera
button). The video
from that camera appears on the selected monitor, and the camera number
appears in the bottom left corner of the monitor.
If you select a camera via the primary T
OUCH
T
RACKER
, its video appears on
the monitor currently controlled by the primary T
OUCH
T
RACKER
. If you
select a camera via the secondary T
OUCH
T
RACKER
, its video appears on the
monitor currently controlled by the secondary T
OUCH
T
RACKER
.
In cases where both T
OUCH
T
RACKER
s have selected the same monitor,
selecting a different camera will result in the LCD of both T
OUCH
T
RACKER
s
being updated. If two users attempt to control the same camera
simultaneously,
“Override”
appears on the LCD of the T
OUCH
T
RACKER
controlled by the second user.
