3-2
Operator's Manual
Defining Quick Views
I M P O R T A N T
The SpeedDome Ultra III, DeltaDome and newer domes support up to 96
views. Other domes support up to 4 views. The Touch Tracker beeps when
you attempt to program a view numbered higher than 4 on domes older than
the SpeedDome Ultra III or DeltaDome.
A
Quick View
automatically and instantaneously calls up a view from a
programmable dome, regardless of where that dome is currently pointing.
You can define your own Quick Views to support your specific needs. You
can define 4 different Quick Views for each programmable dome.
Tip
: Quick Views can be defined from the primary T
OUCH
T
RACKER
only.
The following procedure describes how to define a Quick View.
1.
Using the number buttons, enter the number of the programmable camera
for which you are defining this Quick View. Then press
(the
Camera
button).
2.
Pan and tilt the camera so that it is pointing at the view you want to
define. Then zoom and focus the camera as necessary.
