manualshive.com logo in svg

American Dynamics AD32E, Operator'S Manual

Share
Download
American Dynamics AD32E Operator'S Manual Download Page 38

Defining Automatic System Functions

3-3

Note

For SpeedDome LT, SpeedDome Ultra and DeltaDome, adjusting the focus
switches the dome to manual focus mode. Each time the Quick View is
called, you will need to manually focus the image. To prevent this, press the

Iris Open

 and 

Iris Close

 buttons simultaneously to resume auto focus

mode.

3.

 

When you have the perfect picture displayed on the monitor, press the

Menu

 button.

 

The T

OUCH 

T

RACKER

 is now in the menu/programming mode, and the

menu appears on the LCD:

DEFINE SEQUENCE

SETUP VIEW

4.

 

Press the appropriate button, zoom or focus, to select 

Setup View

.

 

The following prompt appears on the LCD:

CAM 15

MON 2        VIEW #?

I M P O R T A N T

If you press a number already assigned to a Quick View for this camera, the
new Quick View overwrites the existing Quick View. There is no warning to
indicate that the existing Quick View will be replaced. 

Use caution.

5.

 

Press the number on the keypad (1 - 96) that you want to assign to this
Quick View, then press 

Zoom

 or 

Focus

.

Summary of Contents for AD32E























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands