2-6
Operator's Manual
Running the “Apple Peel” Pattern
You can instruct a SpeedDome to run the Apple Peel pattern. This is a default
pattern that all SpeedDomes can run without any user programming.
The
Apple Peel pattern
consists of three
revolutions of camera panning, with tilt starting at
the ceiling. Each revolution tilts down
approximately 30°. The Apple Peel pattern
provides you with a complete view of the area.
Note
If you are using the AD32E system with a Sensornet-to-RS-422 Code
Converter, pressing
Peel
will run Pattern 3 for the currently selected dome if
Pattern 3 has been programmed.
The following procedure describes how to initiate the Apple Peel pattern.
1.
Use the number buttons to enter the number of the monitor where you
want the video displayed. Then press
Monitor
.
2.
Use the number buttons to enter the number of the SpeedDome for which
you want to initiate the Apple Peel pattern. Then press the
Camera
button.
3.
Press the
Peel
button.
The LCD displays the following information:
CAM 23
MON 5 PEEL
The Apple Peel pattern will repeat itself indefinitely until you issue a camera
command (pan, tilt, zoom, focus, or iris) to the dome running the pattern.
Apple Peel
