Amada UNIFLOW 4 REMOTE, Operation Manual, Page: 94 / 176

CHAPTER 4: OPERATING INSTRUCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
4-12 990-908
2. Press the
BASE

key to select the
BASE
temperature value for editing.
NOTE: The
BASE
temperature
value will be highlighted when it
is selected. In this example the
BASE
temperature value is
060
as shown in the bottom left
corner of the screen on the right.
3. Set the temperature value to
50

C with the number keys on
the keypad or the ◄ ► keys ,
and then press the
▲
key to
save the change.
4. Press the
BASE
key twice to
select the
BASE
time field.
Use the keypad to enter a
BASE
time of 01.5 (1.5
seconds), then press the
▲
key.
NOTE: After changing any period temperature or time value, the graphic screen trace will
automatically re-size.
5. Press the
RISE1
key to select the
RISE1
time field for editing. Use the keypad to enter a
RISE1
time to 1.5 (1.5 seconds), then press the
▲
key.
6. Press the
PREHEAT
key to select the
PREHEAT
temperature value for editing. Use the keypad
to enter a temperature 150

C, then press the
▲
key.
7. Press the
PREHEAT
key twice to select the
PREHEAT
time field for editing. Use the keypad to
enter a
PREHEAT
time to 03.5 (3.5 seconds), then press the
▲
key.
8. Press the
REFLOW
key to select the
REFLOW
temperature value for editing. Use the keypad to
enter a temperature 250

C, then press the
▲
key.
9. Press the
REFLOW
key twice to select the
REFLOW
time field for editing. Use the keypad to
enter a
REFLOW
time to 03.5 (3.5 seconds), then press the
▲
key.