Amada UNIFLOW 4 REMOTE, Operation Manual, Page: 144 / 176

APPENDIX D: COMMUNICATION CODES
UNIFLOW
®
4 PULSED HEAT CONTROL
D-6 990-908
13 DATASCR,
14 DEFAULTS,
15 FINE_HEATING,
16 FREQ_DETECT,
17 GOOD_REFLOW_CNTR,
18 GRAPHSCR,
19 HARDWARE,
20 UNUSED_SCREENID1,
21 HEATSWTEST,
22 Not Used
23 HW_LIST,
24 KBDTEST,
25 KDSCR,
26 KISCR,
27 KPSCR,
28 UNUSED_SCREENID2,
29 LOWER_TEMP,
30 MANUAL_TUNING,
31 MAX_TEMP,
32 PASSWORD,
33 PIDPARAMS,
34 PIXELONTEST,
35 PIXELOFFTEST,
36 REFLOW,
37 UNUSED_SCREENID3,
38 REFLOW_COUNTERS,
39 RELAY,
40 RELAY1,
41 RELAY2,
42 RELAY3,
43 RELAY4,
44 RELAY1WHENSCR,
45 RELAY2WHENSCR,
46 RELAY3WHENSCR,
47 RELAY4WHENSCR,
48 RELEASE_TIMER,
49 REPLACE_CNTR,
50 REPLACE_CNTR_SETUP,
51 SETTODEFAULTS,
52 SAFETY_TIMER,
53 SETUP,
54 SHOWPASSWD,
55 SYSTEM_SEC,
56 SYSTEMTESTS,
57 TESTRELAYS,
58 TOTAL_USAGE,
59 UPPER_TEMP,
60 NEW_IDLE_TEMP,
61 LANGUAGE_SETUP,
62 HEADUP_DELAY,
63 SCHEDULE1,
64 SCHEDULE2,
65 Not Used
66 PREHEAT_PEAK_DELAY_TIME