Altigen MAX Communication Server ACM 6.0 Administration Manual Download Page 368

Page: 368 / 448

Chapter 27: Microsoft Exchange Integration

356

MAXCS ACM 6.0 Administration Manual

a. From the MAXCS system, open an MS-DOS window, and type

ping <exchange server name>

then press

Enter

For example, type

ping mailserver

You should see

Reply from...

as the

response. If you see

Request timed out

, there is something wrong with your

network settings or connectivity.

b. Similarly, ping the MAXCS system from the Exchange server. For example, from

the command prompt in Exchange Server, type

ping telesystem

then press

Enter

You should get a proper reply.

7. To check that all Exchange Server Services have started,

a. On the system running Exchange, go to

Services

•

In Windows 2003, select

Start > Administrative Tools > Services

•

In Windows XP, select

Start > Control Panel > Administrative Tools >

Services

A Windows Services window opens.

b. Check the status of the following services to see that they are started (services

listed here are for Exchange 2007):

•

Microsoft Exchange Active Directory Topology

•

Microsoft Exchange Anti-spam Update

•

Microsoft Exchange EdgeSync

•

Microsoft Exchange File Distribution

•

Microsoft Exchange IMAP4

•

Microsoft Exchange Information Store

•

Microsoft Exchange Mail Submission

•

Microsoft Exchange Mailbox Assistants

•

Microsoft Exchange Monitoring

•

Microsoft Exchange POP3

•

Microsoft Exchange Replication Service

•

Microsoft Exchange Search Indexer

•

Microsoft Exchange Service Host

•

Microsoft Exchange Speech Engine Service

•

Microsoft Exchange System Attendant

•

Microsoft Exchange Transport

•

Microsoft Exchange Transport Log Search

•

Microsoft Exchange Unified Messaging

If any of these services are not started, select the service and click

Start

in the

Services window to start it.
If a service cannot be started, please contact Microsoft technical support.

Exchange Server Configuration

After verifying the prerequisites for the AltiServ and Exchange Server systems, you can

start configuring the two systems to enable the Exchange integration features. This
section describes the configurations to be performed in the Exchange Server.

Summary of Contents for MAX Communication Server ACM 6.0

































































































































































































































































































































































































































































Search results

Summary of Contents for MAX Communication Server ACM 6.0

Reviews:

Related manuals for MAX Communication Server ACM 6.0

Brands by name

Popular brands

Altigen MAX Communication Server ACM 6.0, Administration Manual

Search results

Summary of Contents for MAX Communication Server ACM 6.0

Reviews:

Related manuals for MAX Communication Server ACM 6.0

Brands by name

Popular brands