42
-EN
01GB05X009E.fm
ALPINE X009E 68-24567Z66-A (EN)
This unit will display the registration code required to play a DivX
®
VOD (Video On Demand), or you can also display the deregistration
code.
Setting item: Warranty / Copyright Info.
Displaying the Registration Code
1
Touch
[Warranty/Copyright Info.]
.
2
Touch
[DivX(R) VOD]
.
3
Touch
[Registration]
.
The registration code is displayed on the screen.
4
Touch
[OK]
.
Displaying the Deregistration Code
1
Touch
[Warranty/Copyright Info.]
.
2
Touch
[DivX(R) VOD]
.
3
Touch
[Deregistration]
.
The confirmation dialog screen appears.
4
Touch
[OK]
.
The deregistration code is displayed on the screen.
• When you have finished, touch [Cancel]. If you want to continue and
display a new registration code, touch
[OK], check the registration
code, and then touch
[OK] again.
You can initialize all data, to restore the factory settings. Remove the
CD/DVD disc, etc. from the system before operation
Setting item: Restore Factory Setting
1
Touch
[Restore Factory Setting]
.
2
After the confirmation message appears, touch
[OK]
.
The confirmation screen appears again.
3
Touch
[OK]
.
The system starts initialization.
• Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
Installation Setup
[Installation] is selected on the General setup menu in step 3. See
“General Setup Operation” (page 38).
Setting item: Installation
The Installation check screen is displayed.
Setting the External Audio Processor
On/Off
[External AP] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 38).
When a compatible external audio processor is connected, please set
this item to “On”.
Setting item: External AP
Setting contents: Off (Initial setting) / On
• Some items of Sound Setup cannot be adjusted from this unit when
External AP is set to On.
• Press and hold
/AUDIO
button is invalid when External AP is set
to On .
Setting the Digital Output
[Optical] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 38).
To connect an audio processor using optical digital output, set to “On”
by the following procedure.
Setting item: Optical
Setting contents: Off (Initial setting) / On
• This setting is available only when External AP is set to On. Refer to
“Setting the External Audio Processor On/Off” (page 42).
• If Optical is set to On, the Optical (
) indicator appears.
•
,
*
1
(or -,+)
*
2
and
MUTE
*
1
(or
)
*
2
buttons are invalid
when Optical is set to On.
*
1
For Alphard/Vellfire
*
2
For Estima
Checking the DivX
®
Registration
Initializing the System
Off:
The connected audio processor is not
recognised by X009E.
On:
The connected audio processor is recognised
by X009E.
01GB00X009E.book Page 42 Friday, May 9, 2014 1:16 PM
