Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
93
Install the AADvance System
Chapter 5
2. Check
coding pegs
.
• Observe the
legend
on the 9100 processor base unit (and repeated
on some termination assemblies) which defines the six possible
positions for a coding peg. The positions are numbered from 1 to 6.
• Examine a
coding peg
(fitted) and identify the index recess on the
hexagonal flange.
• Refer to the
following table
and verify each
coding peg
is fitted so
its index recess is adjacent to the relevant numbered position.
