126
Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Chapter 5
Install the AADvance System
The ferrites supplied with the expansion cable are snap on components. Fit the
ferrites 50 mm (2 in.) from each end and secure with cable ties either side of the
ferrites.
Connect Expansion Cable between T9100 Base Unit and T9300 I/O Base
unit (I/O Bus2)
1. Connect the expansion cable to a T9100 processor base unit for an I/O
Bus 2 connection.
• Insert a cable socket assembly into the left hand connector of the
T9100 processor base unit.
• Secure the socket assembly by inserting the two M3 socket cap
screws.
• Tighten the screws with a 2.5 mm Allen key.
• Install the cable to the socket assembly and tighten the retaining
screws by hand.
