Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
25
The AADvance Safety Controller
Chapter 2
File Number E251761
The AADvance controller investigation and approval is contained in the
following file certifications:
• NRAG.E251761: Programmable Controllers for Use in Hazardous
Locations Class I, Division 2, Groups A, B, C and D.
The products have been investigated using requirements contained in the
following standards:
• ANSI/ISA 12.12.01-2013, Nonincendive Electrical Equipment for use
in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous
Locations.
• UL508, Industrial Control Equipment, Seventeenth edition, with
revisions through and including April 15, 2010.
• NRAG7.E251761: Programmable Controllers for Use in Hazardous
Locations Certified for Canada; Class I, Division 2, Groups A, B, C and
D.
The products have been investigated using requirements contained in the
following standards:
• CSA C22.2 No 213-M1987, Nonincendive Control Equipment for Use
in Class I, Division 2, Hazardous Locations.
• CSA C22.2 No 142-M1987, Process Control equipment, Edition 1 -
Revision date 1990-09-01.
Products Covered
The products investigated and approved:
Programmable Logic Controllers Models:
• 9110 Processor Module
• 9401/2 Digital Input Module
• 9431/2 Analogue Input Module
• 9451 Digital output Module
• 9482 Analogue Output Module.
Listed Accessories for use with PLCs:
• 9100 Processor Backplane
• 9300 I/O Backplane
• 9801 Digital Input Termination Assembly, Simplex
• 9802 Digital Input Termination Assembly, Dual
• 9803 Digital Input Termination Assembly, TMR
• 9831 Analogue input Termination Assembly, Simplex
• 9832, Analogue Input Termination Assembly, Dual
• 9833 Analogue Input Termination Assembly, TMR
• 9851 Digital Output Termination Assembly, Simplex.
