Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
75
Before You Begin
Chapter 4
individual module position within the controller can thus be uniquely
identified by the combination of its bus and slot numbers, for example 1-01.
The electrical characteristics of the I/O bus interface limit the maximum
possible length of either of the two I/O buses (the combination of I/O base
units and expansion cables) to 8 meters (26.24 ft.).
Adding Field Cable Management
The field, power and other system wiring will be connected to terminals along
the top of the base units. It is recommended a length of cable trunking or the
equivalent be put above each set of base units, for cable management.
Figure 13 - Field Wiring Connections
NOTE
The 9310 Expansion Cable is 2 m (6.56 ft.).
