22
Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Chapter 2
The AADvance Safety Controller
Safety Related System Installation Process
For a Safety Related System the installation process must also be in line with
the following:
Environment Standards
The AADvance system has been investigated to United States National
Standard (s) UL508, 17th Edition and Canadian National Standard (s) C22.2
No 142, 1st Edition. The investigation covers the following modules and
provides requirements for compliance to the standards for use in a non-
hazardous and hazardous environments.
The AADvance controller has been investigated and approved by UL for use as
Industrial Control Equipment in hazardous locations, Class I, Division 2,
Groups A, B, C and D in North America.
The AADvance controller has been assessed for ATEX compliance. The UL
Certification No. is DEMKO 11 ATEX 1129711X Rev 2; UL report number
is 4786144521. The ATEX marking is Ex nA IIC T4 Gc.
Additionally the AADvance controller is approved under the IECEx
certification scheme. The certificate number is IECEx UL 12.0032X
Installation Requirements
for Non-Hazardous
Environment
Investigation File Number E341697
Products Covered
The products investigated and approved:
Programmable Logic Controller Models:
• 9110 Processor Module
• 9401 Digital Input Module
• 9402 Digital Input Module, 16 Channel
• 9431 Analogue Input Module
WARNING:
You must use the installation guidelines given in this manual
and any installation and commissioning procedures that comply with
applicable international or local codes and standards.
CAUTION:
AADvance modules are suitable for use in Class I, Division 2,
Groups A, B, C and D Hazardous locations or Non-hazardous locations only or
equivalent.
ATTENTION:
Pour les modules AADvance sont utilisables dans Class I,
Division 2, A, B, C et D pour un environnement dangereux ou pour un
environnement non dangereux ou équivalente.
