72
Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Chapter 4
Before You Begin
Figure 10 - Free Space for Din Rails Fitting
The flat panel drilling holes are shown in the illustration (
Figure 11
) below:
Figure 11 - Flat Panel Mounting
With reference to
Figure 11
- Flat Panel Mounting, three mounting units are
illustrated above.
Drill three holes per base unit to suit M5 screws.
233mm
Each base unit (2 shown)
occupies 126mm width.
101mm
46mm
171 mm
MIN 256 mm
19 mm
19 mm
88 mm
126 mm
126 mm
HOLE ‘A’
DIMENSION ‘X’
MIN 57 mm
7 mm
Minimum
Clearance
50 mm
Minimum Clearance
30 mm
Minimum
Clearance
50 mm
MIN 69 mm
