30
Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Chapter 2
The AADvance Safety Controller
IECEx Certificate
of Conformity
Certificate No.:
IECEx UL 12.0032X
Date of Issue:
2014-05-28
Issue No.:
2
Page 2 of 4
Manufacturer:
Additional Manufacturing location
(s):
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and
found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products
covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This
certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents
as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified
documents, was found to comply with the following standards:
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
This Certificate
does not
indicate compliance with electrical safety and performance requirements other than those
expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
Quality Assessment Report:
US/UL/ExTR12.0041/00
US/UL/ExTR12.0041/01
US/UL/ExTR12.0041/02
DK/ULD/QAR10.0001/02
Rockwell Automation Ltd.
Hall Road, Maldon
CM9 4LA
United Kingdom
