Aerospool WT9 Dynamic LSA / Club, Pilot Operating Handbook

Page: 193 / 204

Initial issue Page 8-15
8.5 Cleaning and Care
Regular cleaning and care of the aircraft is the first consideration for safe and efficient operation. Cleaning and care
should be based on climatic and flying conditions.
Before cleaning the aircraft cover the pitot probe ports.
Do not use abrasive cleaners or detergents that can make scratches on the paint or corrode the metal. Do not use a
pressure washer to clean the aircraft or engine compartment to avoid damage.
CAUTION
A dirty aircraft downgrades the flight performance!
CAUTION
Before cleaning the aircraft cover the pitot probe ports!
CAUTION
Do not use a pressure washer to clean the aircraft!
Cleaning windshield and windows:
Rinse away all dirt particles from windshield and windows before applying cloth or chamois. The windshield and
windows should be cleaned with an aircraft windshield cleaner or water mixed with detergent. Apply the cleaner
sparingly with a soft cloth or chamois and rub with moderate pressure until all dirt, oil scum and bug stains are
removed. Never rub a dry windshield or windows. Finally wipe the cleaner off with soft flannel cloths.
CAUTION
Do not clean the windshield and windows with alcohol, acetone or
lacquer thinner, because they are made from acrylic. Acrylic
becomes fragile after contact with these liquids!
CAUTION
Never rub a dry windshield or windows!
Exterior cleaning:
Flush away loose dirt with water first. The exterior surfaces should be cleaned with a mild soap and water using a
sponge or soft cotton towel and chamois. These surfaces may be finally protected using good commercial wax
reapplied at least once a year by hand or with a rotating cloth disc. A thin coat of polished wax will fill minor scratches
and help prevent further scratching.
Interior cleaning:
The interior painted surfaces should be cleaned with water mixed with detergent using a sponge or soft cotton towel.
Seats, carpet and upholstery panels should be vacuumed to remove surface dirt and dust. While vacuuming, use a fine
bristle nylon brush to help loosen particles.