AEQ
PHOENIX STRATOS
51
The left-hand CALL button is associated with communication channel 1, while the right-hand
CALL button is linked with communication channel 2.
CALL menu detail (ISDN 128Kbps)
“CH1 CALL MENU” and “CH2 CALL MENU” menus has seven or eight configurable fields in
case of an IP communication (the first four initially visible and the following three or four
available by turning the encoder) and only four (the first four) in case of a V35 or ISDN
communication, with different content depending on the communication type (SIP, IP RTP or
ISDN):
-
URI / DEST IP /TLF (_L1/_L2):
•
URI (IP interface in “PROXY SIP” or “DIRECT SIP” mode): IP identifier (URI).
•
DEST IP (IP interface in “RTP Point to Point” mode): IP address format x.x.x.x.
•
TLF: destination ISDN number (TLF_L1 and TLF_L2 in case of a 128Kbps ISDN
communication: both numbers must be filled in).
NOTE: in the case of an IP identifier, the usual format is:
o
<unit_unit>@<SIP_server_domain> in PROXY SIP mode
(for instance., “[email protected]”); when the unit you’re calling to is
registered in the same SIP server as the one that’s calling, it’s enough just
to use <name_unit>
o
<unit_name>@<unit_IP_address> in DIRECT SIP mode
(for instance, “[email protected]”).
IMPORTANT: the <unit_name> must be no longer than 19 characters.
CALL menu detail (IP-RTP mode)
-
INTERFACE: allows you to define the communication interface.
For 64Kbps ISDN interface 1: ISDN1_L1, ISDN1_L2.
For 128Kbps ISDN interface 1: ISDN1_L1/L2.
For IP: Net1 (IP, associated to channel 1) or Net2 (IP, associated to channel 2).
For V35: V35.
When you want to configure an empty channel: NO INTERFACE.
INTERFACE menu detail
-
CODING / CODING (List): lets you choose the encoding mode or profile.
•
For IP (IP interface in “PROXY SIP” or “DIRECT SIP” mode):
CODING (List): you can select any of the lists created following the procedure
described on section 3.1.10, for instance:
o
ONLY G722
o
LOW DELAY
o
HIGH QUALITY
