AEQ
PHOENIX STRATOS
35
By default, the data configured in this field in order to use AEQ server are the following:
USER: the “User Name” configured in Factory, “phstr_1” for instance.
PASSWORD: the one associated to that user.
REALM or DOMAIN: sip.aeq.es
AUTHENTICATION menu options
-
AUDIO: The “LOCAL PORT” option allows you to configure the value of the IP port
selected to transmit audio at origin over IP. Minimum value 1,024. Maximum value
65,534. Usually recommended value 5004.
AUDIO – LOCAL PORT menu detail
The “SYMMETRICAL RTP” (ON or OFF) option allows you to force the local unit to
send audio to the same IP and port from which it is receiving audio. This option will
allow you to connect to an equipment with unknown IP and/or port (because it’s behind
a router with NAT, for instance).
AUDIO – SYMMETRICAL RTP menu detail
-
NAT TRAVERSAL: see section ”3.1.5.2.4 NAT TRAVERSAL submenu”.
Due to the technical complexity inherent in most of the parameters involved in this ADVANCED
menu and the importance that any modification has in the final operation of the unit, we
recommend that only highly qualified personnel in possession of all the technical documentation
and manuals work on this advanced configuration menu.
3.1.5.2.4. NAT TRAVERSAL submenu.
For IP connections, Phoenix STRATOS offers a total of six different operating modes when
traversing devices with NAT (routers, firewalls…). Each one of those modes is suitable for a
different scenario. For instance, when the units that are establishing communication are in the
same local network, the internal working way will be different than when it’s done through the
Internet.
