AEQ
PHOENIX STRATOS
38
7. RTP PUBLIC IP: parameter that will tell the unit which public IP will correspond to
the RTP of its IP interface, so that it can send the said IP in its SIP messages. The
router or firewall administrator must tell you the value of this parameter. Usually the
administrator will take out SIP traffic and RTP using the same public IP configure in
point number 3. For instance 212.170.180.177.
RTP PUBLIC IP menu detail
8. RTP PUBLIC PORT: parameter that will tell the Phoenix STRATOS which public
port will correspond to the RTP of its IP interface, so that it can send the said port in
its SIP messages. The router or firewall administrator must tell you the value of this
parameter in order to make the required port-forwarding. For instance: 8002.
Detalle menu RTP PUBLIC PORT
In the aforementioned note the detailed configuration and need of port-forwarding is
explained.
•
AUTO 1 (LOCAL AUDIO). This mode will be used primarily when two units that are in
the same local network need to communicate with each other, when the Proxy SIP is on
the Internet and it’s the one provided by AEQ (sip.aeq.es).
•
AUTO 2 (LOCAL AUDIO). This mode will be used primarily when two units that are in
the same local network need to communicate with each other, when a Proxy SIP on the
Internet is used, it’s not the one provided by AEQ (sip.aeq.es) and only if the AUTO1
mode doesn’t work properly.
•
AUTO 3 (AUDIO THRU INTERNET). This mode will be used mainly when you wish to
put two units in communication with each other through the Internet, working with no
Proxy (DIRECT SIP mode) or using the Proxy SIP provided by AEQ (sip.aeq.es)
(PROXY SIP mode). The two configuration parameters available on screen for this
mode are:
1. STUN SERVER: parameter that tells the unit the STUN server that will be used. On
the Internet there is multitude of public STUN servers. By default, the IP address of
stun.sipgate.net server is configured: 217.10.68.152.
2. STUN PORT: parameter that tells the unit the STUN server port assigned by the
administrator. By default: 3478.
NOTE: in this mode the Phoenix STRATOS behaves in the exact same way as the
Phoenix Mobile unit when it is using a STUN server.
•
AUTO 4 (AUDIO THRU INTERNET). This mode is equivalent to AUTO3 but it will be
used the SIP servidor is not the one provided by AEQ and there are problems with
AUTO3 mode. The configuration parameters are the same as for AUTO3 (STUN server
specification).
Due to the technical complexity inherent in most of the parameters involved in this NAT
TRAVERSAL menu and the importance that any modification has in the final operation of the
unit, we recommend that only highly qualified personnel in possession of all the technical
documentation and manuals work on this NAT configuration menu. For additional information,
see ANNEXE C5.
