AEQ
PHOENIX STRATOS
18
3. INTERNAL MENU DESCRIPTION. MANUAL CONTROL.
The configuration and operation of the PHOENIX STRATOS unit are accomplished locally on
the OLED screen in the front panel or remotely by means of the application “AEQ
ControlPHOENIX“ (AEQ Phoenix STRATOS, ALIO, STUDIO, MERCURY, VENUS, VENUS V2
and VENUS V3 Audiocodecs Configuration and Control Software). In this chapter first option is
described. The OLED screen presents all the information and menus associated with the
operating mode of the audiocodec.
Initially, when the Phoenix STRATOS is powered up, for 5 seconds a welcome screen with the
AEQ logo and the name of the device is displayed.
Welcome screen
After the welcome screen, the display will show the MAIN STATUS screen indicating the
configuration of the various communication interfaces. In order to see all the interfaces options
you have to scroll by means of rotary encoder. The right part of the screen shows the position
where you are by means of a scroll line; this function works in every screen where all the
information is not shown in just one view.
MAIN STATUS screen detail
-
Chn1: indicates the communication interface with which communication channel
number 1 is associated and the encoding algorithm used in the connection, among
many other details.
-
Chn2: indicates the communication interface with which communication channel
number 2 is associated and the encoding algorithm used in communication, among
many other details. Exact same configuration as for Chn1.
-
Net1: shows a summary of the configuration and status of the IP interface over the
Net1 channel: PROXY SIP CONNECTED for instance.
-
Net2: shows a summary of the configuration and status of the IP interface over the
Net2 channel: RTP Point to Point for instance.
-
V35: shows the status of the V35 communications interface: “OK PERMANENT
Detected Freq=No valid” for instance.
The last line of this MAIN STATUS screen shows three options associated with the contextual
buttons located beneath the OLED display.
-
SYSTEM: internal control, configuration and operating menu.
-
HPHONES: configuration of the headphone output for control monitoring, available on
the front panel of the unit.
-
VUMETERS: configuration of the working mode of the two groups of VU meters
available in the front panel.
