manualshive.com logo in svg

AEG ME10, Manual

The AEG ME10 manual is available for free download on our website. This user-friendly manual provides detailed instructions for operating and maintaining the AEG ME10 product effortlessly. Enhance your experience with the AEG ME10 by downloading the manual from manualshive.com today.

Share
Download
background image

BREAKER ME10

INTRO

C

ONTENT

1

3.0 - CHIUSURE E INTERBLOCCHI

3.1 Pannello anteriore interruttore

  - Lucchettaggio di sicurezza interruttore
  - Chiusura di sicurezza interruttore
  - Lucchettaggio pulsante

3.2 Parte fissa interruttore in esecuzione 

estraibile

  - Lucchettaggio serrande
  - Lucchettaggio accesso maniglia di manovra
  - Lucchettaggio guide di supporto
  - Chiusura di sicurezza parte fissa
  - Interblocco interruttore in esecuzione 

estraibile

  - Sistema di prevenzione inserimento errato 

(interblocco)

  - Interblocco porta
  

3.2.1 Apertura forzata serrande

  3.2.2 Blocco serranda isolamento
3.3 Interblocco di più interruttori

  - interblocco 1 di 2 & 3
  - interblocco 2 di 3 & 3 con priorità

3.4 Interblocco di rete
3.5 Tabelle opzioni di blocco

--------------------------------------------------------

4.0 - DESCRIZIONE ACCESSORI

  Informazioni generali

  4.1 Sganciatori/bobine
  4.2 Motore di ricarica molle
  4.3 Contatti
  4.4 Accessori d'installazione
  4.5 Altri accessori
  4.6 Parti di ricambio

--------------------------------------------------------

5.0 - MANUTENZIONE, VERIFICA E 

RISOLUZIONE DEI PROBLEMI

5.1 Manutenzione

  - Programma di ispezione

5.2 Procedura di pulizia

  - Ispezione contatti d'arco
  - Ispezione meccanismi principali interruttore

5.3 Controllo parte fissa
5.4 Controllo usura contatto 
5.5 Controllo contatti di sezionamento 

(versione in esecuzione estraibile)

5.6 Controllo morsetti di alimentazione e 

sbarre

5.7 Lubrificazione
5.8 Verifica

  - Verifica Relè di Protezione

5.9 Risoluzione dei problemi

--------------------------------------------------------

6.0 - APPENDICE

6.1 Descrizione codice catalogo
6.2 Dimensioni
6.3 Post-vendita

3.0 - LOCKS AND INTERLOCKS

3.1 Breaker front Fascia

- Breaker Security Padlocking
- Breaker Security Keylocking
- Pushbutton Padlocking

3.2 Drawout Breaker Cassette

- Shutter Security Padlocking
- Racking handle access Padlocking
- Support Slides Padlocking
- Cassette Security Keylocking
- Standard Drawout Breaker Interlock
- Mis insertion device (Interlock)

- Door interlock

  3.2.1  Shutter force open feature
  3.2.2  Isolation Shutter Locking
3.3 Interlocking of Multiple Breakers

- 1 of 2 breaker interlock
- 1 of 3 breaker interlock
- 2 of 3 breaker interlock
- 2 of 3 breaker interlock with priority

3.4 Network Interlock
3.5 Tables Locking options

--------------------------------------------------------

4.0 - ACCESSORIES DESCRIPTION

General Information

4.1 Releases / Coils
4.2 Electrical Charging Motor
4.3 Contacts
4.4 Installation parts
4.5 Other Accessories
4.6 Spare parts

--------------------------------------------------------

5.0 - MAINTENANCE, TESTING AND 
TROUBLESHOOTING

5.1 Maintenance

- Inspection Schedule

5.2 Cleaning Procedure

- Arcing Contacts Inspection
- Circuit Breaker Main Mechanism 
Inspection

5.3 Cassette Inspection
5.4 Contact wear Inspection
5.5 Isolating Contacts (Drawout Type) 
Inspection
5.6 Power Terminals and Busbar Inspection
5.7 Lubrication
5.8 Testing

- Trip Unit Testing

5.9 Troubleshooting

--------------------------------------------------------

6.0 - APPENDIX

6.1 Catalogue number description
6.2 Dimension
6.3 Service

3.0 - SCHLÖSSER UND VERRIEGELUNGEN

3.1 Leistungsschalter Frontplatte

- Verriegelung mit Vorhängeschlössern
- Leistungsschalter Schlüsselsperren
- Drucktaster-Sperrung 

 3.2 Ausfahrtechnik Einschubträger

- Sicherheitsblenden Verriegelung
- Einfahrkurbel Einsteckloch-Verriegelung
- Schienensperrung mit Vorhängeschloss
- Einschubträger Schlüsselsperren
- Standard Einschub-Schalterverriegelung
- Verwechslungsschutz
- Türverriegelung

  3.2.1  Schutzblenden Öffnungsvorrichtung
  3.2.2  Schutzblenden Verriegelung
3.3 Schalter zu Schalter Verriegelung

- 1 von 2 Leistungsschalter-Verriegelung 
- 1 von 3 Leistungsschalter-Verriegelung 
- 2 von 3 Leistungsschalter-Verriegelung 
- 2 von 3 Schalter-Verriegelung mit Vorrang

3.4 Network Interlock
3.5 Tabelle Verriegelungsarten

--------------------------------------------------------

4.0 - ZUBEHÖRBESCHREIBUNG

Allgemeine Informationen

4.1 Module / Betrieb
4.2 Motorantrieb
4.3 Kontakte / Schalter
4.4 Montagezubehör
4.5 Weiteres Zubehör
4.6 Ersatzteile

--------------------------------------------------------

5.0 - WARTUNG, PRÜFUNG UND FEHLERSUCHE

5.1 Wartung

- Inspektions-Ablaufplan

5.2 Reinigungsvorgänge

- Lichtbogenkontakte Inspektion
- Leistungsschaltermechanik-
Hauptinspektion

5.3 Einschubträger-Inspektion
5.4 Kontaktverschleiß-Inspektion
5.5 Trennkontakte (Einschub) Inspektion
5.6 Hauptanschlüsse und Sammelschienen- 
      Inspektion
5.7 Schmierung
5.8 Tests

- Auslöseeinheiten-Test

5.9 Fehlersuche

--------------------------------------------------------

6.0 - ANHANG

6.1 Katalognummer Beschreibung
6.2 Abmessungen
6.3 Service

1.0-03

Summary of Contents for ME10





































































































































































































































Reviews:

No comments

Related manuals for ME10

Eaton Power Defense 32-NF Instruction Leaflet preview
Power Defense 32-NF
Brand: Eaton Pages: 11
OEZ BC160NT405 Series Instructions For Use Manual preview
BC160NT405 Series
Brand: OEZ Pages: 17
Eaton BZM1-1 BT Series Instruction Leaflet preview
BZM1-1 BT Series
Brand: Eaton Pages: 4
Eaton N238-001-BL-6A Installation Instructions preview
N238-001-BL-6A
Brand: Eaton Pages: 4
Eaton Power Defense IZMX16 Instruction Leaflet preview
Power Defense IZMX16
Brand: Eaton Pages: 6
Siemens 3VF7 Operating Instructions Manual preview
3VF7
Brand: Siemens Pages: 12
Siemens N250X Installation Instructions preview
N250X
Brand: Siemens Pages: 2
Siemens 3VT9300-8CB30 Operating Instructions preview
3VT9300-8CB30
Brand: Siemens Pages: 3
Siemens 3VT9200-4WN00 Operating Instructions preview
3VT9200-4WN00
Brand: Siemens Pages: 3
Siemens 3VT9100-8CB30 Operating Instructions preview
3VT9100-8CB30
Brand: Siemens Pages: 5
Siemens 3VM12 - ED Series Operating Instructions Manual preview
3VM12 - ED Series
Brand: Siemens Pages: 7
Siemens 3RV1 Series Operating Instructions preview
3RV1 Series
Brand: Siemens Pages: 4
Siemens 3AH35-SE Series Instruction Manual preview
3AH35-SE Series
Brand: Siemens Pages: 48
Siemens 3VA9 3 0JA1 Series Operating Instructions Manual preview
3VA9 3 0JA1 Series
Brand: Siemens Pages: 8
Siemens 3MT8080 Series Quick Start Manual preview
3MT8080 Series
Brand: Siemens Pages: 4
Siemens 3VA6-HM Series Operating Instructions Manual preview
3VA6-HM Series
Brand: Siemens Pages: 10
Vertiv NetSure 520406 Installation Manual preview
NetSure 520406
Brand: Vertiv Pages: 10
Hubbel CIRCUIT- LOCK HBLDS3SSP General Information preview
CIRCUIT- LOCK HBLDS3SSP
Brand: Hubbel Pages: 5

Brands by name

Popular brands

Load more brands