R3132 Series Spectrum Analyzer Operation Manual
7.1 R3132 Specifications
7-4
(6)
Input and Output
(7)
General Specifications
Characteristics
Specification
RF input
Connector
Impedance
VSWR / Preamplifier OFF
VSWR / Preamplifier ON
N type
50
Ω
(nominal)
<
1.5 : 1 (100 kHz to 2 GHz) (characteristic value)
with input attenuator 10 dB to 50 dB
< 2 : 1 (9 kHz to 3 GHz) (characteristic value)
with input attenuator 5 dB to 50 dB
< 2.5 : 1 (9 kHz to 3 GHz) (characteristic value)
Probe power
±
12 V (nominal), 4-pin connector
Calibration output signal
BNC female, 50
Ω
(nominal)
30 MHz, -20 dBm
10MHz reference input
BNC female, 500
Ω
(nominal)
-10 dBm to +10 dBm
External trigger input
BNC female
Phone output
Small size monophonic female
GPIB interface
IEEE-488 bus connector
Serial interface
D-Sub 9pins
Printer interface
D-Sub 25pins, ESC/P, ESC/P-R, PCL
Video output
VGA (15 pins, female)
Floppy drive
3.5 inch, MS-DOS format
Characteristics
Specification
Operating environment range
0
°
C to +50
°
C
Relative humidity 85% or less (without condensation)
Storage environment range
-20
°
C to +60
°
C
Relative humidity 85% or less
AC input power source
Automatic switching to 100 VAC or 200 VAC
For 100 VAC: 100 to 120 VAC, 50 to 60 Hz
For 200 VAC: 220 to 240 VAC, 50 to 60 Hz
Power consumption
< 200 VA
Mass
< 14kg
Dimensions
Approximately 424(W)
×
177(H)
×
300(D) mm
(not including projections such as rubber feet and connectors)
