R3132 Series Spectrum Analyzer Operation Manual
5.3.4 Harmonic Distortion
5-103
Measuring the Harmonic Distortion
2.
On the R3132 series, after preset, set controls as follows:
Center Frequency:
100 kHz
Span:
Zero
RBW:
1 kHz
TG:
ON
TG Output Level:
-10 dBm
3.
On the spectrum analyzer, after preset, set controls as follows:
Center Frequency:
350 kHz
Span:
600 kHz
Reference level:
0 dBm
4.
On the spectrum analyzer, press SINGLE for single sweep.
5.
Measure the level difference of signal between fundamental and second har-
monic signal.
6.
Record measured level difference on the performance verification record sheet.
7.
Repeat step 2 through 6 for each setting listed in Table 5-30.
8.
Record maximum data on the performance verification record sheet as result.
