ADVANTEST R3132 Series Operation Manual Download Page 127

Page: 127 / 588

R3132 Series Spectrum Analyzer Operation Manual

2.3.8 Spectrum Mask Measurement

2-92

19. Press POWER MEASURE, 1/2_more and Spectrum Mask.

Limit Line 1 is displayed and the frequency span is optimized using the previ-
ously set channel spacing and specified bandwidth.

20. Press SPAN, 5 and MHz.

A frequency span of 5 MHz is set again.

21. Press POWER MEASURE and CS/BS Setup.

The dialog box used to set the channel spacing and specified bandwidth is dis-
played.

22. Press 1, ., 2, 3 and MHz.

A carrier bandwidth of 1.23 MHz is set. The cursor is moved to the 1st channel’s
Channel Space.

23. Press 9, 0, 0 and kHz.

The 1st channel’s channel spacing is set to 900 kHz. The cursor is moved to the
1st channel’s Band Width.

24. Press 0 and Hz.

The 1st channel’s specified bandwidth is set to 0 Hz. The cursor is moved to the
2nd channel’s Channel Space.

25. Press 1, ., 9, 8 and MHz.

The 2nd channel’s channel spacing is set to 1.98 MHz. The cursor is moved to
the 2nd channel’s Band Width.

26. Press 0 and Hz.

The 2nd channel’s specified bandwidth is set to 0 Hz.

Figure 2-92 CS/BS Setup Dialog Box

27. Press RETURN.

The CS/BS Setup dialog box is closed.

Summary of Contents for R3132 Series













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R3132 Series

Reviews:

Related manuals for R3132 Series

Brands by name

Popular brands

ADVANTEST R3132 Series, Operation Manual

Search results

Summary of Contents for R3132 Series

Reviews:

Related manuals for R3132 Series

Brands by name

Popular brands