R3132 Series Spectrum Analyzer Operation Manual
2.4.5 Setting the Screen Title
2-120
4.
Select character B and press Hz(ENTER). Then press -(BK SP). Character B
appears temporarily in the upper part and disappears when it is corrected by
pressing -(BK SP). Note that the cursor is next to character A on the right hand
side.
5.
Then enter the rest of the characters: D, V, A, N, T, E, S and T.
6.
Press the numeric key 1. Check to see if numeric character 1 has been entered
after the characters ADVANTEST (the final display is ADVANTEST1). Only
numeric characters can be entered directly from the numeric keys.
7.
Press Change Title.
This closes the Title Entry dialog box, and the characters you entered are dis-
played in the upper left-hand corner of the screen.
Figure 2-120 Displaying the Screen Title
CAUTION:
1.
The dialog box closes, leaving the data you entered on the screen when you press
any key other than the numeric keys, the -(BS) key or the unit keys.
2.
A new title always overwrites the old one and is displayed in the specified area.
Deleting a title previously set
8.
Use a null line (the entire line consists of spaces) as the title.
A previously set title is deleted from the screen.
