Advantech EKI-9512-C0IDW10E, User Manual

Page: 83 / 326

EKI-9500 Series User Manual 64
To add a new SNMP trap receiver:
Click System > Advanced Configuration > SNMP > Trap Receiver v3 > Add .
Figure 4.54 System > Advanced Configuration > SNMP > Trap Receiver v3 >
Add
The following table describes the items in the previous figure.
UDP Port The UDP port on the SNMP management host that will receive the
SNMP notifications. If no value is specified when configuring a
receiver, the default UDP port value is used.
Refresh Click Refresh to update the screen.
Add Click Add to add a new SNMP trap receiver.
Remove Click Remove to remove the selected entries.
Item Description
Host IP Address The IP address of the SNMP management host that will receive traps
generated by the device.
User Name The name of the SNMP user that is authorized to receive the SNMP
notification.
Notify Type The type of SNMP notification to send the SNMP management host:

Inform: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is acknowl-
edged by the SNMP management host.

Trap: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is not acknowl-
edged by the SNMP management host.
Security Level The security level associated with the SNMP user, which is one of the
following:

No Auth No Priv: No authentication and no data encryption (no
security).

Auth No Priv: Authentication, but no data encryption. With this
security level, users send SNMP messages that use an MD5
key/password for authentication, but not a DES key/password
for encryption.

Auth Priv: Authentication and data encryption. With this security
level, users send an MD5 key/password for authentication and a
DES key/password for encryption.
Retries The number of times to resend an inform message that is not
acknowledged by the SNMP receiver.
Item Description