EKI-9500 Series User Manual
206
To add a new LLDP interface:
Click
Switching
>
LLDP
>
Interface
>
Add
.
Figure 4.228 Switching > LLDP > Interface > Add
The following table describes the items in the previous figure.
Transmit Manage-
ment Information
Indicates whether management address information for the local
device is transmitted in LLDPDUs. Other remote managers can obtain
information about the device by using its advertised management
address.
Refresh
Click
Refresh
to update the screen.
Add
Click
Add
to add a new LLDP interface.
Edit
Click
Edit
to edit the selected entries.
Remove
Click
Remove
to remove the selected entries.
Item
Description
Interface
The interface associated with the rest of the data in the row. Only inter-
faces that have at least one LLDP setting enabled appear in the table.
In the Add LLDP Interface window, use this field to select the interface
with the LLDP settings to configure. In the Edit LLDP Interface window,
this field identifies the interface that is being configured.
Transmit
The LLDP advertise (transmit) mode on the interface. If the transmit
mode is enabled, the interface sends LLDP Data Units (LLDPDUs) that
advertise the mandatory TLVs and any optional TLVs that are enabled.
Receive
The LLDP receive mode on the interface. If the receive mode is
enabled, the device can receive LLDPDUs from other devices.
Notify
The LLDP remote data change notification status on the interface. If
the notify mode is enabled, the interface sends SNMP notifications
when a link partner device is added or removed.
Transmit Manage-
ment Information
Indicates whether management address information for the local
device is transmitted in LLDPDUs. Other remote managers can obtain
information about the device by using its advertised management
address.
Optional TLV (s)
Port Description
Select this option to include the user-configured port description in the
LLDPDU the interface transmits.
Item
Description
