229
EKI-9500 Series User Manual
To add a new VLAN:
Click
Switching
>
VLAN
>
Status
>
Add
.
Figure 4.253 Switching > VLAN > Status > Add
The following table describes the items in the previous figure.
4.4.20.2
Port Configuration
Use the VLAN Port Configuration page to configure VLAN membership for the inter-
faces on the device and to specify whether traffic transmitted by the member ports
should be tagged. The device supports IEEE 802.1Q tagging. Ethernet frames on a
tagged VLAN have a 4-byte VLAN tag in the header.
To access this page, click
Switching
>
VLAN
>
Port Configuration
.
Figure 4.254 Switching > VLAN > Port Configuration
The following table describes the items in the previous figure.
Item
Description
VLAN ID or Range
Specify VLAN ID(s). Use '-' to specify a range and ',' to separate VLAN
IDs or VLAN ranges in the list.
Submit
Click
Submit
to save the values.
Cancel
Click
Cancel
to close the window.
Item
Description
VLAN ID
The menu includes the VLAN ID for all VLANs configured on the
device. Click the drop-down menu to select the correct VLAN to view
or configure settings for a VLAN
Interface
The interface associated with the rest of the data in the row. When
editing VLAN information for one or more interfaces, this field identifies
the interfaces that are being configured.
Status
The current participation mode of the interface in the selected VLAN.
The value of the Status field differs from the value of the Participation
field only when the Participation mode is set to Auto Detect. The Status
is one of the following:
Include: The port is a member of the selected VLAN.
Exclude: The port is not a member of the selected VLAN.
