EKI-9500 Series User Manual
202
To access this page, click
Switching
>
MVR
>
Group
.
Figure 4.222 Switching > MVR > Group
The following table describes the items in the previous figure.
To add a new group:
Click
Switching
>
MVR
>
Group
>
Add
.
Figure 4.223 Switching > MVR > Group > Add
The following table describes the items in the previous figure.
4.4.13.3
Interface
Use the MVR Interface Status page to configure MVR settings on specific interfaces.
To configure the settings for one or more interfaces, select each entry to modify and
click Edit. The same MVR settings are applied to all selected interfaces.
Item
Description
Group
The multicast group address.
Status
The status of the group, which can be one of the following:
Active: Group has one or more MVR ports participating.
Inactive: Group has no MVR ports participating.
Members
The list of interfaces which participate in the MVR group. In the com-
patible mode, all source ports are members of all groups by default.
Refresh
Click
Refresh
to update the screen.
Add
Click
Add
to add a new group.
Edit
Click
Edit
to edit the selected entries.
Remove
Click
Remove
to remove the selected entries.
Item
Description
Group
The multicast group address.
Contiguous Group
Count
Specify the desired number of groups to be created starting with the
entered group address. The default contiguous group count is 1.
Submit
Click
Submit
to save the values.
Cancel
Click
Cancel
to close the window.
