EKI-9500 Series User Manual
228
To access this page, click
Switching
>
VLAN
>
Status
.
Figure 4.252 Switching > VLAN > Status
The following table describes the items in the previous figure.
Note!
You cannot remove or rename VLAN 1.
Item
Description
VLAN ID
The unique VLAN identifier (VID).
Name
A user-configurable name that identifies the VLAN.
Type
The type of VLAN, which can be one of the following:
Default: The default VLAN. This VLAN is always present, and the
VLAN ID is 1.
Static: A user-configured VLAN.
Dynamic: A VLAN created by GARP VLAN Registration Protocol
(GVRP).
RSPAN
Identifies whether the VLAN is configured (Enabled) as the Remote
Switched Port Analyzer (RSPAN) VLAN. The RSPAN VLAN is used to
carry mirrored traffic from source ports to a destination probe port on a
remote device.
Unknown Multicast
Use this field to specify whether all the ports will forward unknown mul-
ticast frames in this VLAN. The factory default is “Mroute”. The possi-
ble values are:
Flooding: flood all unknown multicast frames to all the ports in
this VLAN, except for the receiving port.
Discarding: discard all unknown multicast frames received from
all the ports in this VLAN.
Mroute: flood the unknown multicast frames to multicast router
ports in this VLAN.
Refresh
Click
Refresh
to update the screen.
Add
Click
Add
to add a new VLAN.
Edit
Click
Edit
to edit the selected entries.
Remove
Click
Remove
to remove the selected entries.
