SWEEPING SYSTEM
TigerCat, Hydro-Retriever 4500
Service Manual
Middle Skirt - Open the broom access door, remove the (6) “I” bolts, straps and the inner skirt. Then remove
the (5) “J” bolts and the strap holding the middle skirt in place.
Inner Skirt - Open the broom access door, remove the (6) “I” bolts, straps and the inner skirt.
Follow steps in reverse order to reassemble.
FIGURE 4
Inner
I
J
Middle
Outer
H
Middle Skirt - Remove the (7) “B” bolts and cover “C”. Then remove the “D” bolts and the straps holding the
middle skirt in place.
Inner Skirt - Remove the (7) “B” bolts and cover “C”. Then remove the (6) “E” bolts and the straps holding the
middle skirt in place. When installing the new middle skirt, position it so that area of the skirt marked “F” is on
the inside (broom-side) of panel “G” - not between the the strap and panel “G”. The holes at area “F” are not
actually used to hold the skirt in place.
Follow steps in reverse order to reassemble.
Replacing Skirts at Right (door) End of Broom Housing
Outer Skirt - Remove the (8) “H” bolts (see Figure 4) and the straps holding the skirt in place.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
BROOM HOUSING SKIRTS (continued)
16
