Adtech ADT-DK300A, Manufacturer'S Manual

Page: 123 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
114
Effective time : Instant
Note : This parameter determines the Z phase search direction when servo Z
phase enable parameter is enabled in P2.009~P2.016.
0: Positive
1: Negative
082
X Ext Home Eanble
083
Y Ext Home Eanble
084
Z Ext Home Eanble
085
4 Ext Home Eanble
Range : 0~1
Unit : None
Authority : Super Admin
Default : 1
Effective time : Instant
Note : When mechanical home mode is selected, this parameter determines
whether external deceleration switch should be searched. If this
parameter is set to 0, and P2.009~P2.016 (servo Z phase enable) is also
set to 0, the home mode sets current point as the home directly in
mechanical mode.
0: No
1: Yes
086
X Encoder LogicDir< >
●
087
Y Encoder LogicDir< >
●
088
Z Encoder LogicDir< >
●
089
4 Encoder LogicDir< >
●
Range : 0~1
Unit : None
Authority : Super Admin
Default : 0
Effective time : Instant
Note : If the logic direction obtained by the encoder is reverse to the actual
motion direction of the axis, please set this parameter.
Handwheel encoder reuses A axis encoder.